Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Key features:
| • Wide application range: |
| The IviumStat is well suited for applications requiring a wide dynamic range, such as battery testing, corrosion measurements and electrochemical research applications. It has a high power of ±5A and low current ranges, down to 1pA full scale. |
| • Complete solution: |
| The IviumStat offers a complete package, all the standard Electrochemical techniques are included. The IviumStat also has an integrated high-performance Frequency Response Analyser for EIS measurements from 10µHz to 8MHz. All measurement and dataprocessing software is included (for Windows based pc’s). |
| • Safety: |
| The compliance (maximum current or potential) of the instrument can be defined by the operator. Thus valuable samples may be protected, and unsafe situations prevented. |
| • Automation: |
| Multiple analog and digital input & output ports are available for monitoring & control of peripheral equipment. This functionality is fully integrated in the software. |
| • Expandability: |
| The IviumStat can be expanded with a wide variety of options and modules, including a Bipotentiostat, True Linear Scan generator, various power boosters, multiplexer and FastScan. |
| • Hardware: |
| – Automatic current range selection: 1pA to 10A/1mV to 10V (50V) – Automatic variable noise filter and potentiostat/galvanostat stability settings – Simultaneous acquisition of current/potential and up to 8 peripheral analog signals – Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory – Applicable scanrates: 1µV/s to 10,000 V/s – Minimum interval time/resolution: 10µs – Result optimalisation by automated tuned filters, gain amplifiers and dc-subtraction |
Software:
The IviumStat is controlled via Ivium's own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.
| System Performance: |  |
| Current compliance | ±5 A |
| Maximum output Voltage | ± 10V below 1A and ± 8V up to 5A |
| Potentiostat Bandwidth | 8 MHz for small signals, 300kHz for large signals |
| Stability settings | High Speed, Standard, and High Stability |
| Programmable response filter | 1MHz , 100kHz , 10kHz , 1kHz , 10Hz |
| Signal acquisition | dual channel 16 bit ADC, 100.000 samples/sec |
| Potentiostat: | |
| Applied potential range | ±10 V, with 0.33mV resolution |
| Applied potential accuracy | 0.2%, or 2mV |
| Current ranges | ±10nA to ±10A in 10 steps |
| High sensitivity current ranges | ±1pA, ±10pA, ±100pA, ±1nA |
| Measured current resolution | 0.015% of current range, minimum 0.15fA |
| Galvanostat | |
| Applied current resolution | 0.033% of applied current range |
| Applied current accuracy | 0.2% |
| Potential ranges | ±1mV, ±10mV, ±100mV, ±1V, ±10V |
| Measured potential resolution | 0.003% of potential range, minimum 40nV |
| Impedance Analyser | |
| Frequency range | 10µHz to 8MHz |
| Amplitude | 0.015mV to 1.0V, or 0.03% to 100% of current range |
| DC offset | 16 bit dc offset subtraction, and 2 dc-decoupling filters |
| Dynamic range | 12nV to 10V, and 0.05fA to 5A |
| Electrometer | |
| Input impedance | >1000 Gohm //<8pF |
| Input bias current | <10 pA |
| Bandwidth | >16 MHz |
| Special functions | |
| Ohmic drop compensation | 2 V/current range, 16 bits resolution |
| Safety features | automatic disconnect on internal/external exceptions |
| Peripheral connections | |
| 8 Analog in, and 2 analog out | 0 to +4V, 16 bits resolution |
| 2 Digital inputs, and 3 Digital outputs | 0 to +5V |
| I-out, and E-out | analog monitor for cell current and potential |
| AC-out | ±0.5V sinewave 10µHz-8MHz with variable attenuation |
| Channel-X, and Channel-Y inputs | ±4V: to record impedance from peripheral devices |
| Environment | |
| Power requirements | 100-240V, 47-63Hz, 150VA |
| Interfacing | USB 1.1, 2.0 and 3 compliant |
| Size | w x d x h = 26 x 33 x 12 cm |
| Weight | 4.0 kg |
| PC requirements | Windows XP/Vista/7/8, with free USB port |
Resource & Download
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@vnation.com.vn | Sales: +84 0939021319 | IVIUM – Electrochemical Interface & Impedance Analyser (Model:IviumStat) .
