Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
DPI 800/802 – Pressure Indicator/Loop Calibrator
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held pressure indicators and loop calibrator instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
The DPI 800/802 Pressure Indicators and Loop Calibrators are ideal pressure measurement tools. Pressure ranges from 25 mbar to 700 bar including vacuum options. All-inclusive accuracy can be relied on from one year to the next, even in tough environmental conditions.
Features
- Ranges from 25 mbar to 700 bar
- Single or dual range configuration
- Pressure test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch verification
Applications
- Pressure test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch verification
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
Specifications
Pressure Test and Measurement
| DPI 800 Pressure Indicator | The ideal tool for pressure test and measurement |
|---|---|
| Pressure Ranges | 10 in H2O to 10,000 psi (25 mbar to 700 bar) including vacuum options |
| All-Inclusive Accuracy | Can be relied on from one year to the next, even in tough environmental conditions (see specifications) |
| Dual Sensor Configuration | Extended measurement range and simultaneous two channel reading (P1 and P2 or P1 – P2) |
| Stainless Steel Sensor Construction | Available for compatibility with a wide range of fluids and gases (refer to range table) |
| Programmable Leak Test | Reports the pressure drop and leak rate |
| Advanced Features | Hold, maximum/minimum/average, alarm, and tare facilitate troubleshooting |
Pressure Instrument and Loop Maintenance
| DPI 802 Pressure Loop Calibrator | Provides simultaneous pressure and mA measurement for transmitter and loop maintenance |
|---|---|
| Dual Readings | Simultaneous measurement of pressure and mA for transmitter calibration and loop maintenance |
| 24V Loop Power Supply | Energizes transmitters and control loops |
| Automatic Switch Test | Captures open/closed trip values providing a fast and highly accurate “safety system” check |
| HART Resistor | Can be switched into the loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250 O resistor |
IDOS™ Flexibility
| Intelligent Digital Output Sensor (IDOS) | Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). |
|---|---|
| Total Flexibility | IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator. |
| Plug and Play | Modules are interchangeable between instruments, requiring no set-up or instrument calibration. |
| Range Expansion | Achieved by adding modules (please refer to the IDOS Universal Pressure Module datasheet). |
| *S_Standard Accuracy | Total accuracy over 32°F to 122°F (0°C to 50°C), including one year stability and calibration uncertainty |
|---|---|
| *P_Premier Accuracy | Precision over 65°F to 82°F (18°C to 28°C) For operation over 41°F to 113°F (5°C to 45°C): 0.014% FS for ranges above 10 psi (700 mbar) 0.075% FS for ranges below 15 psi (1 bar) Stability over a year: 0.01% reading ranges above 5 psi (350 mbar) 0.03% reading ranges below 10 psi (700 mbar) Calibration uncertainty: 50 ppm of reading |
| Single or Dual Range | One or two internal sensors can be selected. For dual range instruments, G/D ranges will be configured as G (gauge). Only one of the two sensors can be 1500 psi (100 bar) or above. |
| Overpressure (maximum transient/intermittent pressure) | 5 psi (350 mbar) and below 4 x FS 10 to 10,000 psi (700 mbar to 700 bar) 2 x FS Maximum working pressure: 1.1 x FS |
| Pressure Connections | 1/8 NPT female or G 1/8 female |
DPI 800 Series Common Specification
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
|---|---|
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III |
| Shock and Vibration | BS EN61010:2001, Def Stan 66-31, 8.4 Cat III |
| EMC | BS EN61326-1:1998 + A2:2001 |
| Safety | Electrical BS EN61010:2001. Pressure Equipment Directive (PED), Class SEP. CE marked |
| Display | Graphic LCD with backlight. Resolution 99999 |
| Size (l x w x h) and Weight | 7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 18 oz (500 g) |
| Batteries | 3 AA alkaline, >50 hours measure, >10 hours 24V source |
Resource & Download
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@vnation.com.vn | Sales: +84 0939021319 | DRUCK-Pressure Indicator/Loop Calibrator ( Model: DPI 800/802).
