Description
The Guardian 1030S AC/DC/IR/SC Hipot Tester has all of the features of the Guardian1030 plus eight HV Scan Channels for multi-point testing.
Quick Discharge: In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.
Ground Continuity Check: All of the Guardian 1000 Series units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.
Features
- AC Hipot Voltage 50 to 5000VAC, Output Current to 30mA
- DC Hipot Voltage 50 to 6000VDC, Output Current to 10mA
- IR Measurements from 100kΩ to 50GΩ, Voltage: 50 to 1000VDC
- Built-In 8 Channel Scanner for Multi-Point Testing (1030S)
- Measure Real and Total Current
- Programmable Hi/Lo Limits for Pass/Fail Testing
- Ground Continuity Check with High Limit of 1 Ohm
- Ability to Perform Multiple Tests in Sequence
- Large LCD Display for Menu Programming and Test Results
- Internal Storage and Recall of 99 Test Setups
- Programmable Ramp and Test Times
- Front Panel Lockout Prevents Changes to the Test Setup
- Automatic Offset to Zero Out Residual Current
- Fast Cutoff and Quick Discharge of Device Under Test
- RS-232 and I/O Interfaces Included Standard
- IEEE-488 and Printer Interfaces Optional
- Built-In Operator Prompted Software Calibration Routine
- G1010 and G1030: UL Listed and CE Marked