Rohde-schwarz- Signal Analyzer (Model:R&S®FSQ)

By
-
0
329
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên VNATION sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Key Facts

  • Frequency range from 20 Hz to 3.6/8/26.5/40 GHz
  • 28 MHz signal analysis bandwidth, optionally 120 MHz
  • Outstanding RF characteristics:
    • TOI typ. +25 dBm
    • 1 dB compression point +13 dBm
    • 84 dBc ACLR/3GPP with noise correction
    • –173 dBm (1 Hz) displayed average noise level (DANL) with noise correction and R&S®FSU-B24 preamplifier
  • Analysis of signals in the analog and digital baseband
  • Numerous firmware applications extending the signal analysis capabilities
  • 16 Msample I/Q memory, expandable up to 705 Msample

Features & Benefits

  • Excellent RF performance for demanding applications

    • Outstanding RF features
      • 84 dB ACLR for 3GPP with noise correction
      • 77 dB ACLR for 3GPP multicarrier signals (four adjacent carriers)
      • TOI > +20 dBm, typ. +25 dBm
      • 1 dB compression +13 dBm
      • Displayed average noise level (DANL) typ. –173 dBm using noise correction (1 Hz bandwidth) and R&S®FSU-B24 preamplifier
      • Phase noise –160 dBc (1 Hz) at 10 MHz carrier offset
      • Phase noise –133 dBc (1 Hz) at 10 kHz carrier offset

  • Signal and spectrum analysis in a single instrument

    • Signal analysis with up to 120 MHz bandwidth
      • Signals from RF, analog or digital baseband
      • Up to 705 Msample (I and Q)
      • Low phase/frequency response
      • User-definable sample rate
    • Best signal fidelity for modulation analysis
    • Ready for analysis of multistandard, multicarrier transmitters

  • Wide range of functions

    With its wide range of functions, the R&S®FSQ is practically unparalleled on the spectrum analyzer market. Even the base unit includes all important functions.

    • Channel filters from 100 Hz to 5 MHz
    • RRC filters
    • 1 Hz to 50 MHz resolution bandwidth (RBW)
    • Number of measurement points/trace selectable between 155 and 30 001
    • Time-selective spectrum analysis with gating function
    • Up to 80 measurements/s in manual mode
    • SCPI-compatible GPIB command set
    • GPIB command set compatible with the R&S®FSE/R&S®FSIQ and legacy HP spectrum analyzer
    • Fast ACP measurement in time domain
    • Statistical signal analysis with CCDF function
    • RMS detector
    • Transducer factor for correcting antenna or cable frequency responses
    • Harmonic distortion measurement function
    • Spurious emission measurements with up to 100 001 points, in up to 20 segments
    • External reference from 1 MHz to 20 MHz in 1 Hz steps
    • LAN interface 100BaseT (1 Gbit)
    • 16 Msample I and Q memory

    Brief Description

    The R&S®FSQ is the solution for all development and production measurement tasks. It offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard.

    Specifications

    R&S®FSQ3 R&S®FSQ8 R&S®FSQ26 R&S®FSQ40
    Frequency range 20 Hz to 3.6 GHz 20 Hz to 8 GHz 20 Hz to 26.5 GHz 20 Hz to 40 GHz
    Reference frequency aging: 1 x 10 –7/year, with R&S®FSU-B4 option: 2 x 10 –8
    Spectral purity
    Phase noise typ. –133 dBc (1 Hz) at 10 kHz carrier offset, carrier frequency 500 MHz
    Distortion 1 Hz
    Sweep time
    Span >10 Hz 2.5 ms to 16 000 s
    Span 0 Hz (zero span) 1 μs to 16 000 s
    RBW 10 Hz to 50 MHz, FFT filter: 1 Hz to 30 kHz, channel filter, EMI bandwidth
    VBW 1 Hz to 30 MHz
    Display range DANL to +30 dBm
    DANL (1 Hz RBW)
    1 GHz typ. –158 dBm typ. –155 dBm typ. –156 dBm typ. –155 dBm
    7 GHz − typ. –154 dBm typ. –155 dBm typ. –153 dBm
    13 GHz − − typ. –151 dBm typ. –151 dBm
    26 GHz − − typ. –146 dBm typ. –147 dBm
    40 GHz − − − typ. –141 dBm
    DANL with preamplifier ON
    (R&S®FSU-B25), 1 GHz, 1 Hz RBW    		 –162 dBm –162 dBm –162 dBm –162 dBm
    Displayed averagenoise level with preamplifier ON
    (R&S®FSU-B24), 26 GHz, 10 Hz RBW    		 − − typ. –166 typ. –166 dBm
    DANL with preamplifier ON
    (R&S®FSU-B23), 26 GHz, 1 Hz RBW    		 − − –150 dBm −
    Trace detectors Max Peak, Min Peak, Auto Peak, Sample, RMS, Average, Quasi Peak
    Total measurement uncertainty, f < 3.6 GHz 0.3 dB
    Display linearity 0.1 dB (0 dB to –70 dB)
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
VNATION: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@vnation.com.vn | Sales: +84 0939021319 | Rohde-schwarz- Signal Analyzer (Model:R&S®FSQ).